Diagram 60/22 (Tracks 281-294)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Wiper Motor Control Module, Rain/Light Recognition Sensor, Washer Nozzle Heater, Headlamp Washer Pump, Windshield Washer Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G397 - Rain/Light Recognition Sensor Locations

J39 - Headlamp Washer Relay Overview of Relay Carrier

J400 - Wiper Motor Control Module Overview of Control Modules

SB19 - Fuse 19 (on fuse panel B) Overview of Fuses

SB20 - Fuse 20 (on fuse panel B) Overview of Fuses

SB36 - Fuse 36 (on fuse panel B) Overview of Fuses

T10a - 10-Pin Connector, purple, connector station left electronics box Overview of Connector Stations and Connectors

T10e - 10-Pin Connector, grey, connector station A-pillar, left Overview of Connector Stations and Connectors

T17d - 17-Pin Connector, black, connector station A-pillar, left Overview of Connector Stations and Connectors

T17f - 17-Pin Connector, green, connector station A-pillar, left Overview of Connector Stations and Connectors

V - Windshield Wiper Motor

V5 - Windshield Washer Pump

V11 - Headlamp Washer Pump

Z20 - Left Washer Nozzle Heater

Z21 - Right Washer Nozzle Heater

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections in Interior of Vehicle

(261) - Ground Connection (in heated spray jet wiring harness)

(375) - Ground Connection 10 (in main wiring harness)

(389) - Ground Connection 24 (in main wiring harness)

(607) - Ground Connection (in plenum chamber, left) Overview of Ground Connections in Front Part of Vehicle

* - Only models with headlamp washer

** - 9-Pin relay carrier, behind driver's storage compartment

# - Through May 2007

## - from June 2007

Previous Diagram 60/21 (Tracks 267-280)

Next Diagram 60/23 (Tracks 295-308)