HID Lamp Control Module

HID Lamp Control Module

• Adjust the headlamps after performing any work that could have affected their adjustment.

CAUTION!
Danger to life due to high voltage.

Removing

- Remove headlamp, refer to => [ Headlamp, when Reusing Current Headlamp ] Headlamp, when Reusing Current Headlamp.

- Remove bolts - arrows -.





- Pull high-intensity gas discharge lamp control module off from headlamp housing.

Installing

• Tightening specification, refer to => [ HID Headlamps Assembly Overview ] HID Headlamps Assembly Overview.

Install in reverse order of removal, observing the following:

- Check seal between high-intensity gas discharge lamp control module and headlamp housing.

- Install the headlamp, refer to => [ Headlamp, when Reusing Current Headlamp ] Headlamp, when Reusing Current Headlamp.