Rear Body Acceleration Sensor (G343)

Rear Body Acceleration Sensor (G343)

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

Removing






- Remove the wheel.

- Remove the left rear wheel housing liner.

- Release and disconnect the connector - 2 -.

- Remove the bolts - 1 - and the sensor - 3 -.

Installing






Install in reverse order of removal. Note the following:

- When installing, always pay attention to the installation position of the sensor.

- Install the sensor as illustrated.

- Tighten the bolts - 1 - to 5 Nm.