Rear Flange Shaft Ball Bearing

Rear Flange Shaft Ball Bearing

Special tools, testers and auxiliary items required

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Thrust Disc (VW 412)

• Press Tube (2040)

• Tube 60 mm Dia. (VW 415 A)

Procedure

- Remove the center differential housing. Refer to => [ Center Differential Housing, Transmission Installed ] Center Differential Housing, Transmission Installed.

- Remove the following: the locking ring from the rear flange shaft - A -, the rear flange shaft and the rear flange shaft seal.






- Remove the ball bearing locking ring - B -.

• The rear flange shaft and the seal for the rear flange shaft - A - are shown installed.

Flange shaft ball bearing, removing





Installing the flange shaft ball bearing





• The shoulder on the (VW 415 A) - arrow - faces the (VW 412).