Convertible Top Moulding / Trim: Description and Operation

Headliner Component Overview

• The Audi Avant headliner is shown in the following.





1 Cover

2 Bolt

3 Sun Visor

• Removing and installing, refer to => [ Sun Visor ] Sun Visor

4 Cover

• For sun visor center bracket

• Removing and installing, refer to => [ Sun Visor Center Mount ] Sun Visor Center Mount

5 Sun Visor Center Bearing

• Removing and installing, refer to => [ Sun Visor Center Mount ] Sun Visor Center Mount

6 Center Cover

• For interior light/front reading light

7 Decorative Frame

• For center cover

8 Diffusion Lens

• For interior light/front reading light

9 Bolt

2 Nm

10 Interior Lamp/Front Reading Lamp

11 Vanity Mirror Lamp

12 Bolt

1.5 Nm

13 Vanity Mirror Lamp

14 Sunroof Cover Frame

15 Headliner

• Removing and installing, refer to => [ Headliner ] Headliner

• Release clip - arrow - => [ Release Headline Clip ]

16 Interior Lamp/Rear Reading Lamp

17 Bolt

9 Nm

• Self-locking

• Replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

18 Partition Grille Mount

• Removing and installing, refer to => [ Headliner ] Headliner

19 Cover

• For partition grille mount

• Removing and installing, refer to => [ Headliner ] Headliner

20 Bolt

21 Roof Grab Handle

• Removing and installing, refer to => [ Roof Grab Handle ] Roof Grab Handle

Release Headline Clip





- Release clips on rear clip - arrows -.