Diagram 108/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Directional Stabilization Assistance Control Module, Directional Stabilization Assistance Windshield Heater, Fuse





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview of Relay Carrier

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

J759 - Directional Stabilization Assistance Control Module Lane Assist System Overview

SC3 - Fuse 3 (on fuse panel C) Overview of Fuses

T10al - 10-Pin Connector, black, on directional stabilization assistance control module

T20p - 20-Pin Connector, black, on data bus on board diagnostic interface

T26a - 26-Pin Connector, black, on data bus on board diagnostic interface

Z67 - Directional Stabilization Assistance Windshield Heater

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections in Interior of Vehicle

(375) - Ground Connection 10 (in main wiring harness)

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

• - CAN-Bus (data wire)

* - 9-Pin relay carrier, behind driver's storage compartment

** - Phased-in modification

# - Through May 2008

## - from June 2008

Next Diagram 108/3 (Tracks 15-28)