Oil Pressure Regulation Valve

Oil Pressure Regulation Valve

Removing

- Remove the ribbed belt form the A/C compressor ribbed belt pulley. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Disconnect the electrical connector - 1 - on the left electrohydraulic engine mount solenoid valve (N144).






• Ignore - arrows -.

- Disconnect the connector - 1 - for the wiring leading to the air conditioning compressor clutch solenoid.







Refrigerant can cause serious personal injury.

• Do not open the air conditioning refrigerant circuit.

- Remove A/C compressor bolts - arrows -.


Danger of damaging the refrigerant lines and hoses.

• Do not stretch, kink or bend refrigerant lines and hoses.

- Attach the A/C compressor with the lines still attached to the left side of the vehicle.

- Disconnect the connector - 1 -.






- Remove the bolt - 3 - and the oil pressure regulation switch (N428) - 4 -.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, Upper and Lower Oil Pan, Oil Pump and Oil Cooler Overview.

• Replace O-ring - 2 -.

- Install A/C compressor.

- Install the ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.