LATCH Bracket

LATCH Bracket

Special tools, testers and auxiliary items required

• torque wrench (V.A.G 1331)





1 LATCH Bracket

Quantity: 2

• Check after accident. Refer to => [ LATCH Bracket, Inspecting after an Accident ] LATCH Bracket, Inspecting after an Accident

• Removing

- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove the bolts - 3 -.

- Remove the LATCH bracket - 1 -.

• Installing

Installation takes in reverse order of removal.

Observe the following when doing so:

Replace the bolts if the LATCH bracket is removed due to an accident.

2 Guide

Quantity: 4

• Clipped to LATCH bracket

• Must be created and installed by VOTEX or customer service before installing a child seat.

3 Screws

Quantity: 4

• Tightening specification 30 Nm

• Must be replaced after an accident