Front Three-Point Seat Belt with Belt Tensioner and Switchable Force Limiter from 08.2006 Assembly Overview

Front Three-Point Seat Belt with Belt Tensioner and Switchable Force Limiter from 08.2006 Assembly Overview





1 Connector

• For switchable belt load limiter

• Disconnecting and connecting, refer to => [ Switchable belt load limiter
connector, disconnecting ] Front Three-Point Seat Belt with Pyrotechnic Belt Tensioner and Switchable Force Limiter

2 Cable Tie

3 Front Belt Guide

• Removing and installing, refer to => [ Front Belt Guide ] Front Belt Guide

4 Seat Belt Height Adjuster

• Removing and installing, refer to => [ Seat Belt Height Adjuster ] Seat Belt Height Adjuster

• Function test, refer to => [ When checking function, following conditions
must be fulfilled: ] Seat Belt Height Adjuster

5 Belt Relay

• must swing by itself in carrier direction after tightening bolt

6 Belt Webbing

7 Upper B-pillar Trim

8 Belt Height Adjustment Slide

9 Bolt

• 55 Nm

• If belt relay is being removed for accident repairs, replace screw

• Belt relay must swing by itself in carrier direction after tightening screw.

10 Expanding Rivet

• Quantity: 2

11 Bolt

• 5 Nm

• Quantity: 2

12 Air Duct

13 Belt roller with Pyrotechnic Belt Tensioner and Switchable Belt Load Limiter

• Removing and installing, refer to => [ Front Three-Point Seat Belt with Pyrotechnic Belt Tensioner and Switchable Force Limiter ] Front Three-Point Seat Belt with Pyrotechnic Belt Tensioner and Switchable Force Limiter

14 Bolt

• 55 Nm

• If three-point seat belt is being removed for accident repairs, replace bolt.

15 Belt Tensioner Connector

• Removing and installing, refer to => [ Pyrotechnic belt tensioner
connector, disconnecting ] Front Three-Point Seat Belt with Pyrotechnic Belt Tensioner and Switchable Force Limiter

16 Switchable Belt Load Limiter Connector