Windshield Wiper System Overview

Windshield Wiper System Overview






1 Screw

2 Windshield Wiper Motor (V)

• With wiper motor control module (J400)

• Removing and installing, refer to => [ Windshield Wiper Motor with Wiper Motor Control Module ] Service and Repair

3 Screw

4 Nut

• 17 Nm

5 Cap

6 Windshield Wiper Arm, Passenger's Side

• Different lengths, refer to the Electronic Parts Catalog (ETKA)

• Removing and installing, refer to => [ Windshield Wiper Arms ] Windshield Wiper Arms

• Adjusting, refer to => [ Windshield Wiper Arms, Adjusting ] Windshield Wiper Arms, Adjusting

7 Windshield Wiper Blade, Passenger's Side

• Different lengths, refer to the Electronic Parts Catalog (ETKA)

• Replacing, refer to => [ Windshield Wiper Blades ] Windshield Wiper Blades

8 Windshield Wiper Blade, Driver's Side

• Different lengths, refer to the Electronic Parts Catalog (ETKA)

• Replacing, refer to => [ Windshield Wiper Blades ] Windshield Wiper Blades

9 Windshield Wiper Arm, Driver's Side

• Different lengths, refer to the Electronic Parts Catalog (ETKA)

• Removing and installing, refer to => [ Windshield Wiper Arms ] Windshield Wiper Arms

• Adjusting, refer to => [ Windshield Wiper Arms, Adjusting ] Windshield Wiper Arms, Adjusting

10 Cap

11 Nut

• 17 Nm

12 Screw

13 Water Drain Channel

Windshield Wiper Motor - Tightening Specification and Sequence






- Tighten the bolts in - 1, 2, 3 - sequence in 2 stages as follows:

- Install each by hand as far as the stop.

- Tighten to 8 Nm.