Front Bumper Cover, Audi RS4

Front Bumper Cover, Audi RS4

Removing






- Remove the front noise insulation. Refer to => [ Front Noise Insulation ] Front Noise Insulation.

- Remove the bolts - arrows -.

- Remove front wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.






- Remove bolt - arrow -.

- Remove the lock carrier cover. Refer to => [ Lock Carrier Cover ] Lock Carrier Cover.






- Disconnect the connector- 1 - for the front parking aid sensor.

- Remove garage door opener control module (J530) - 2 - if applicable.

- Remove the bolts - arrows -.

- Disengage the side walls on the front side panel and remove the bumper cover forward.

Installing

• Tightening specifications, refer to => [ Bumper Cover Assembly Overview, Audi RS4 ] Bumper Cover Assembly Overview, Audi RS4.

Install in reverse order of removal. Note the following:

- Install Garage door opener control module (J530) - 2 -.

- Install the lock carrier cover. Refer to => [ Lock Carrier Cover ] Lock Carrier Cover.

- Install wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.

- Install the front noise insulation. Refer to => [ Front Noise Insulation ] Front Noise Insulation.