Seat Heating Element, Standard Seat

Seat Heating Element, Standard Seat

Removing






- Remove the seat pan cover and cushion. Refer to => [ Cover and Upholstery, Seat Pan without Seat Depth Adjustor ] Cover and Upholstery, Seat Pan Without Seat Depth Adjustor.

- Cover, separating from upholstery, refer to => [ Cover Upholstery, Seat Pan without Seat Depth Adjustor, Separating and Connecting ] Cover Upholstery, Seat Pan Without Seat Depth Adjustor, Separating and Connecting.

- Cut electrical wire - 3 - off directly at old seat heating element - 2 -.

• The old seat heating element remains on the upholstery - 1 - and the new seat heating element is bonded over it.

• Ignore - A through E - and - arrows -.

Installing

- Align the new heating element on upholstery.

• Make sure the new seat heating element is affixed to the old heating element.

• Remove the protective films in the bonding sequence for the heating element area.

• When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

- Bond the individual areas of the seat heating element - 2 - in sequence - A, B, C and D -.






- Bond the bolsters areas - E -.

- Route the connecting wires to the individual heating surfaces in the base of the gaps - arrows -.

- Pull the wire - 3 - through the slit in the cushion - 1 -.

Further installation is performed in the reverse order of removal.