Diagram 48/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Anti-theft alarm system sensor, Alarm horn, Vehicle electrical system control module, Central locking and anti-theft alarm system antenna





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G273 - Interior monitoring sensor Central Locking Component Overview

G384 - Vehicle inclination sensor Central Locking Component Overview

G578 - Anti-theft alarm system sensor Ultrasonic Interior Monitoring Overview

H12 - Alarm horn Plenum chamber, engine compartment routing

J519 - Vehicle electrical system control module Component Locations

R11 - Antenna Locations

R24 - Antenna amplifier Rear Lid/ Roof Routing

R47 - Central locking and anti-theft alarm system antenna Antenna System Overview

R130 - Rear window antenna 1 Locations

ST1 - Fuse panel 1

SA4 - Fuse 4 (on fuse panel A)

SB5 - Fuse 5 (on fuse panel B)

SB8 - Fuse 8 (on fuse panel B)

T2ad - Double connector, in the luggage compartment, right

T4p - 4-pin connector

T52b - 52-pin connector Vehicle Electrical System Control Module -J519- from June 2009

T52c - 52-pin connector Vehicle Electrical System Control Module -J519- from June 2009

(44) - Ground connection on A-pillar, lower left Locations

(370) - Ground connection 5 (in main wiring harness)

(B272) - Positive connection (30) (in main wiring harness)

(B528) - LIN bus connection 1 (in main wiring harness)

* - For vehicles with anti-theft alarm system

*2 - Anti-theft alarm system with interior monitoring

*3 - Coupe

*4 - Relay and fuse carrier in the engine compartment E-box

*5 - Roadster

Previous Diagram 48/15 (Tracks 183-196)

Next Diagram 48/17 (Tracks 211-224)