Diagram 11/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Electronic Damping Control Module, Dampening Adjustment Button, Dampening Adjustment Indicator Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E387 - Dampening Adjustment Button Locations

E461 - Front/Center Console Control Head

J250 - Electronic Damping Control Module Component Locations

J519 - Vehicle Electrical System Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations

K189 - Dampening Adjustment Indicator Lamp Locations

L156 - Switch Illumination Lamp

T16b - 16-Pin Connector, brown, on center console switch module

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T47a - 47-Pin Connector, on electronic damping control module

(44) - Ground Connection (on left lower A-pillar) Locations

(384) - Ground Connection 19 (in main wiring harness)

(394) - Ground Connection 29 (in main wiring harness)

(B340) - Connection 1 (58s) (in main wiring harness)

(B341) - Connection 2 (58s) (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

^ - CAN-Bus (data wire)

* - => Wiring Diagram Standard Equipment

Previous Diagram 11/4 (Tracks 29-42)