Programming and Relearning

Intake Valves and Separating Valves, Mark60EC, Basic Setting

It is possible to perform a basic setting to the intake valves only if the ABS control module was replaced.

Use vehicle diagnosis, testing and information system (VAS 5051 B) or (VAS 5052).

• Once the intake valve basic settings have been done, then a basic setting to the separating valves must be performed.

- Connect the vehicle diagnosis, testing and information system (VAS 5051 B) or (VAS 5052).

• Chassis

• Brake System

• 01- On Board Diagnostic (OBD) capable systems

• 03 ABS control module J104 MK60EC

• 03 Functions ABS MK60EC J104

• Intake valve basic setting

• Separating valve basic setting

Follow the instructions exactly.