Seat Angle Adjuster

Seat Angle Adjuster

Removing

• Follow all safety precautions when working on pyrotechnic components.

• Before handling pyrotechnical components (for example, disconnecting the connector), the person handling them must discharge static electricity. For example, by briefly touching the door striker pin.

- Turn on the ignition.

- Disconnect the battery ground cable from the battery with the ignition on.

- Remove the front seat:

• Standard seat and Sport seat (manual), refer to => [ Manual Standard Front Seat ] Manual Standard Front Seat.

- Attach the front seat to the (VAS 6136) => [ Front Seats, Installing on the ] Front Seats, Installing on the Fixture For Seat Repair (VAS 6136).

- Remove tunnel side trim panel. Refer to => [ Trim, Sill Side ] Trim, Sill Side.

- Remove the seat angle adjustment handle. Refer to => [ Seat Angle Adjustment Handle ] Seat Angle Adjustment Handle.

- Remove the shoulder pin - 2 -.






- Remove the screw - 3 -.

- Remove the seat angle adjuster - 1 -.

Installing

• Follow all safety precautions when working on pyrotechnic components.

• Before handling pyrotechnical components (for example, connecting electrical connector), the person handling them must discharge static electricity. For example, by briefly touching the door striker pin.

Install in reverse order of removal. Note the following:

- Replace the shoulder pin - 2 - and the bolt - 3 -.

- Clean the threaded holes before installing, for example using a thread tap.

• Make sure the connectors are installed all the way in and are secure.

Connect the battery with the ignition switched on. Pyrotechnic components could deploy after connecting the battery if they were not repaired correctly. Individuals must not be inside the vehicle when connecting the battery.

- Connect the battery ground cable with the ignition turned on.

• If the airbag indicator lamp (K75) indicates a fault after installation, the DTC memory must be checked, deleted and checked again using the Vehicle Diagnostic Tester.

Tightening specifications, refer to => [ Seat Angle Adjuster Overview ] Seat Angle Adjuster Overview.