Air Intake Duct, Removing From Air Intake Housing

Air Intake Duct, Removing from Air Intake Housing

Removing

- Turn off the ignition.

- Remove the air intake housing. Refer to => [ A/C Unit Air Intake Housing ] A/C Unit Air Intake Housing.

- Loosen the catches - A - and remove the air intake duct - B - from the air intake housing - C -.






Installing

Installation is carried out in the reverse order while observing the following.

- Insert the air intake duct - B - into the brackets - C - on the air intake housing - C - and join both parts together.

• If one of the retaining tabs - A - has broken off or if one of the welded points no longer holds, both housing parts can be bolted together with screws - D -.

- Install the removed parts in the opposite order.

- Perform a basic setting and the output Diagnostic Test Mode (DTM) on the A/C system using the Vehicle Diagnostic Tester under "Guided Fault Finding".

- Check the Climatronic control module (J255) display and control head DTC memory and erase any displayed malfunctions if necessary using the Vehicle Diagnostic Tester under "Guided Fault Finding".