Center Instrument Panel Vent
Center Instrument Panel Vent
Special tools, testers and auxiliary items required
• Hook (3438)
Removing
• The instrument panel vent has a hole on both sides for attaching the hook (3438).
- Remove the MMI screen cover. Refer to:
• => [ MMI Screen Cover, Through MY 11 ] MMI Screen Cover, Through MY 11.
• => [ MMI Screen Cover, From MY 12 ] MMI Screen Cover, From MY 12.
- Alternating on both sides, carefully remove the instrument panel vent - 1 - from the installation opening using the hook (3438).
- Vehicles with illumination: Disconnect the connector on the instrument panel vent.
Installing
Install in reverse order of removal. Note the following:
• Check the clips for damage or deformation and replace them if necessary.
- When sliding the instrument panel vent into the installation opening, make sure the air duct engages correctly.
- Press the instrument panel vent into the installation opening as far as the stop.