Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> S4 Quattro Sedan (8K2) V6-3.0L SC (CCBA) >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Service and Repair >> Compressor >> Drive Plate With Anti-Friction Bearing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Plate With Anti-Friction Bearing







Drive Plate with Anti-Friction Bearing

- Remove the drive plate from the compressor shaft. Refer to => [ A/C Compressor Drive Plate ] A/C Compressor Drive Plate.

- Remove the circlip - A -.






- Remove the drive plate - B -.

• Replace circlip - A -.

• Clean the A/C compressor flange before sliding on drive plate.

• When installing circlip - A -, note that it cannot be bent open more than is necessary for installation.

• Insert circlip - A - on correct side, the side with beveled insertion edge - C - faces away from A/C compressor (install flat side facing compressor).

pro multis · About Operation CHARM