51 16 366 Removing and Installing Right Glovebox With Housing

51 16 366 - Removing and installing right glovebox with housing





Necessary preliminary tasks:
Version with can holder:
- Remove both front cup holders 51 16 202 Removing and Installing/Replacing Front (Inner or Outer) Cup Holder





Release screws (1).
Pull out glovebox (1) slightly.





Disconnect plug connections (2) and feed cable out of guide (3).
Depending on version, disconnect further plug connections.
Remove glovebox (1).






Installation:
Guides (1) for glovebox must not be damaged or missing.
Version with can holder:
Guides (2) for cup holders must not be damaged or missing.