Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2007 >> 750Li (E66) V8-4.8L (N62TU) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair




12 13 511 - Replacing ignition coil (N62TU)





Necessary preliminary tasks:
- Switch off ignition
- Remove intake filter housing





Release screws and remove holder (1).
Pull ignition coil covers (2) out of rubber grommets.





Unlock plug fastener (1) of ignition coil.





Detach ignition coil connector in direction of arrow.
Pull out ignition coil (2).
This procedure is applicable to all ignition coils.





Installation Note:
Insert rubber seal on ignition coils (2) between guides.





Assemble engine.

Note:
Read out DME fault memory.
Check function of DME.
pro multis · About Operation CHARM