Ignition Control Module: Service and Repair

DISTRIBUTORLESS IGNITION SYSTEM (DIS) ASSEMBLY

Ignition Module Assembly Replacement:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. DIS electrical connectors.
3. Spark plug wires. (Note proper relationship, wires to coils.)
4. DIS assembly to block bolts (3).
5. DIS assembly from engine.

INSPECT
^ Crankshaft sensor O-ring for wear, cracks, and leakage. Replace if necessary. Lube new 0-ring with engine oil before installing.

INSTALL OR CONNECT
1. DIS assembly to engine.
2. DIS assembly to block bolts (3).
^ Torque to 27 Nm (20 lb. ft.).
3. Spark plug wires to proper coils.
4. DIS electrical connectors.
5. Negative battery cable.