Front Fender Liner: Service and Repair

Front Fender Liner Replacement

Removal Procedure





1. Remove the bolts from the front fender liner at the front bumper fascia.
2. Remove the nut from the stud at the rear of the front fender liner.
3. Remove the bolt from the front tab of the front fender liner at the lower engine compartment side rail.
4. Remove the bolts from the front fender liner at the rear of the fender.
5. Remove the front fender liner from the fender.



Installation Procedure





1. Install the front fender liner to the wheelhouse opening over the stud.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nut to the stud at the rear of the front fender liner.

Tighten the nut to 4 N.m (35 lb in).

3. Install the bolts to the front fender liner at the front bumper fascia.

Tighten the bolts to 2 N.m (18 lb in).

4. Install the bolts to the front fender liner at the rear of the fender.

Tighten the bolts to 7 N.m (61 lb in).

5. Install the bolt from the front tab of the front fender liner at the lower engine compartment side rail.

Tighten the bolts to 4.5 N.m (40 lb in).