Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Special Tools

EN-45059 - Angle Meter

For regional equivalent tools, refer to Special Tools Tools and Equipment.

Removal Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement Battery Tray Replacement.

2. Use an engine lifter to raise and lower the engine.




3. Remove and DISCARD the left transmission mount to the bracket bolts (1).




4. Remove the left transmission mount to the body bolts (1).

5. Remove the left transmission mount to the body nut (2).

6. Remove the transmission mount (3) from the vehicle.

Installation Procedure




1. Install the left transmission mount (3) to the vehicle.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the transmission mount to the body bolts (1) and tighten to 62 Nm (46 lb ft).

3. Install the transmission mount to the body nut (2) and tighten to 62 Nm (46 lb ft).





Caution: Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

4. Install the 3 NEW transmission mount bolts (1) and tighten a first pass to 50 Nm (37 lb ft).

5. Tighten the 3 NEW transmission mount bolts (1) a final pass to an additional 60-75 degrees, using the EN-45059 - meter.

6. Install the battery tray. Refer to Battery Tray Replacement Battery Tray Replacement.