Water Pump Cover Replacement

Water Pump Cover Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the front wheelhouse liner right side. Refer to Front Wheelhouse Liner Replacement Service and Repair.

3. Remove the engine splash shield right side. Refer to Front Compartment Splash Shield Replacement Service and Repair.





4. Remove the 4 water pump cover bolts (1) and the water pump cover (2).

Installation Procedure





Use an NEW water pump cover gasket (3).

Caution:
Refer to Fastener Caution Fastener Caution.

1. Install the water pump cover (2) and the 4 water pump bolts (1) and tighten to 10 Nm (89 lb in).

2. Install the engine splash shield right side. Refer to Front Compartment Splash Shield Replacement Service and Repair.

3. Install the front wheelhouse liner right side. Refer to Front Wheelhouse Liner Replacement Service and Repair.

4. Lower and unsupport the vehicle.