Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2013 >> Verano L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Manual Transmission Shift Lever and Selector Lever Cable Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Manual Transmission Shift Lever and Selector Lever Cable Replacement




Manual Transmission Shift Lever and Selector Lever Cable Replacement

Removal Procedure

1. Remove battery tray. Refer to Battery Tray Replacement Battery Tray Replacement.





2. Remove shift lever and selector lever cable (2) from transmission control housing (3).

3. Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.





4. Remove shift lever and selector lever cable (1) from bulkhead.

5. Remove shift lever and selector cable from control lever housing. Refer to Transmission Control Replacement Transmission Control Replacement.

Installation Procedure

1. Install shift lever and selector cable to control lever housing. Refer to Transmission Control Replacement Transmission Control Replacement.

2. Clip shift lever and selector lever cable (3) into transmission control lever housing (1).





Note:
Install the guide with the white marking upwards to the bulkhead. Do not cross the cables.

3. Install shift lever and selector lever cable from inside the vehicle.

4. Install shift lever and selector lever cable (1) to bulkhead.

5. Check for correct fit.





6. Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).

7. Install shift lever and selector lever cable to transmission control housing (3).

8. Install battery tray. Refer to Battery Tray Replacement Battery Tray Replacement.

9. Adjust shift lever and selector lever cable. Refer to Manual Transmission Shift Lever and Selector Lever Cable Adjustment Manual Transmission Shift Lever and Selector Lever Cable Adjustment.

pro multis · About Operation CHARM