Transmission Mount Bracket Replacement - Rear

Transmission Mount Bracket Replacement - Rear

Removal Procedure

1. Raise vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the 3 exhaust flexible pipe to catalytic converter nuts and lower the exhaust flexible pipe. Refer to Catalytic Converter Replacement (2.4L LEA) Catalytic Converter ReplacementCatalytic Converter Replacement (2.0L LHU) Catalytic Converter Replacement.

3. Support rear of powertrain using a suitable jack stand.




4. Remove transmission rear mount bolt (1).




5. Remove 3 transmission rear mount bolts (1).

6. Remove transmission rear mount (2).

Installation Procedure




1. Install transmission rear mount (2).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install 3 transmission rear mount bolts (1) and tighten to 100 Nm (74 lb ft).




3. Install transmission rear mount bolt (1) and tighten to 100 Nm (74 lb ft).

4. Remove jack stand.

5. Install the 3 exhaust flexible pipe to catalytic converter nuts. Refer to Catalytic Converter Replacement (2.4L LEA) Catalytic Converter ReplacementCatalytic Converter Replacement (2.0L LHU) Catalytic Converter Replacement.

6. Lower vehicle.