Inside Rearview Mirror Replacement (Spring Clip Mount)

Inside Rearview Mirror Replacement (Spring Clip Mount)

Removal Procedure


Notice: Do not use tools or other objects to pry the mirror mount or the mirror away from the windshield. Using tools may damage the mirror mount, the mirror or the windshield.





1. Remove the rearview mirror wire cover (3).
2. Disconnect the electrical connectors (1) at the rear of the mirror (2).
3. Using both hands, grasp both sides of the mirror (2) at the top.
Pull the rearview mirror (2) downward, while twisting simultaneously, in order to release the rearview mirror from the support button.



Installation Procedure





1. Position the bottom of the mirror base against the windshield at the top of the support button (4).
2. Slide the base onto the support button (4).
Maintain the base parallel to the windshield.
3. Hold the base firmly against the windshield, pulling downward in order to engage the base onto the support button (4). An audible click will be heard as the base snaps onto the support.
This operation requires at least 20 pounds of force.
4. Ensure that the mirror assembly is securely attached to the support button (4) by moving the mirror in a normal up/down and side to side range.
5. Connect the electrical connectors (1).
6. Install the rearview mirror wire cover (3).
7. Calibrate the mirror compass. Refer to Compass Calibration Description.