Power Mirror Replacement

Power Mirror Replacement

Removal Procedure

1. Remove the front door panel. Refer to Front Side Door Trim Panel Replacement. Service and Repair




2. Remove the outside rear view mirror screws.
3. Remove the outside rearview mirror from the front door.




4. Disconnect the outside rearview mirror electrical connector.

Installation Procedure




1. Connect the front door outside rearview mirror electrical connector.




2. Position the outside rearview mirror to the front door.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the outside rearview mirror screws.

Tighten the outside rearview mirror screws to 10 Nm (89 lb in).

4. Install the front door panel. Refer to Front Side Door Trim Panel Replacement. Service and Repair