Trim Panel Replacement - Rear Window Shelf (With Sunshade)

Trim Panel Replacement - Rear Window Shelf (With Sunshade)

Removal Procedure





1. Remove the rear seat back. Refer to Seat Back Replacement - Rear (1st Design ) (Seat Back Replacement - Rear (1st Design ))Seat Back Replacement - Rear (2nd Design) (Seat Back Replacement - Rear (2nd Design)) in Seats.
2. Remove the rear seat belt retractors. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
3. Remove the 2 push in retainers from the cross car beam.
4. Lift up on the front edge of the rear shelf panel in order to release the hook and loop material.
5. Lift up on the rear of the rear shelf panel in order to release the hook and loop material.
6. Lift shelf trim panel over the sunshade and remove.



Installation Procedure





1. Install the rear shelf into the vehicle.
2. Slide the rear shelf panel rearward with downward pressure in front of shade opening in order to engage the front lip of the shade housing. Ensure the rubber flap of the shade is above the rear window trim panel.
3. Pull the center seat belt through the slot in the trim panel.
4. Apply downward pressure along the rear of the shelf trim panel to engage the hook and loop material.
5. Seat the front of the rear shelf panel to the cross car beam.
6. Install the 2 push in retainers.
7. Install the rear seat belt retractors. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
8. Install the rear seat back. Refer to Seat Back Replacement - Rear (1st Design ) (Seat Back Replacement - Rear (1st Design ))Seat Back Replacement - Rear (2nd Design) (Seat Back Replacement - Rear (2nd Design)) in Seats.