Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2008 >> DTS V8-4.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair >> Transmission Rear Mount Bracket Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Rear Mount Bracket Replacement



Transmission Rear Mount Bracket Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Support the engine assembly with a suitable jack.
3. Remove the nuts (1) securing the transmission mount (2) to the transmission mount bracket (3).




4. Raise the jack allowing the engine assembly to lift from the engine frame slightly.
5. Remove the transmission mount bracket mounting bolts.
6. Remove the transmission mount bracket



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the transmission mount bracket and mounting bolts to the engine.

Tighten the bolts to 110 N.m (89 lb ft).

2. Lower the transmission in position.




3. Install the nuts (1) to the mount (2) and mount bracket (3).

Tighten the mount nut to 75 N.m (55 lb ft).

4. Remove the engine assembly support jack.
5. Lower the vehicle.


pro multis · About Operation CHARM