Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2008 >> XLR V8-4.4L SC >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Driver/Vehicle Information Display >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver/Vehicle Information Display: Service and Repair



Driver Information Display Switch Replacement

Removal Procedure

1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair) .




2. Remove the retaining screws from the bottom of the switch pad.
3. Pull outward to disengage the retaining clip.
4. Disconnect the electrical connectors.




5. Remove the retaining screws from the DIC switch.
6. Remove the DIC switch.



Installation Procedure





1. Install the DIC switch to the IP cluster bezel.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the DIC switch retaining screws.

Tighten the screws to 1.5 N.m (13 lb in).





3. Connect the DIC switch electrical connector.
4. Install the retaining screw at the bottom of the DIC switch pad.

Tighten the screw to 1.5 N.m (13 lb in).

5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair) .


pro multis · About Operation CHARM