Water Pump: Service and Repair

Fig. 22 Water Pump Replacement:

1. On models equipped with airbag, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. On all models, disconnect battery ground cable and drain cooling system.
3. Remove upper fan shroud, then remove accessory drive belts.
4. Remove fan and pulley from water pump hub.
5. Remove power steering pump, A/C compressor and AIR pump brackets, as required.
6. Remove radiator lower hose and heater hose from water pump.
7. Remove water pump attaching bolts and the pump, Fig. 22. Note position of bolts for assembly reference.
8. Reverse procedure to install.
9. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.