Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Water Pump: Service and Repair

Coolant Pump Mounting:






REMOVAL
1. Disconnect battery ground cable, then drain and recover cooling system. For additional procedures refer to Cooling System / Service and Repair / Draining and Refilling. Service and Repair
2. Remove serpentine belt.
3. Remove coolant pump pulley bolts.
4. Remove coolant pump pulley and coolant pump then clean coolant pump mating surfaces.

INSTALLATION
1. Coat bolt threads with pipe sealant GM P/N 1052080 or equivalent.
2. Install new gasket and coolant pump.
3. Install attaching bolts and torque to 10 Nm (89 lb. in.)
4. Install coolant pump pulley and torque bolts to 21 Nm (15 lb. ft.).
5. Install serpentine belt.
6. Refill coolant. Refer to Cooling System / Service and Repair / Draining and Refilling. Service and Repair
7. Connect negative battery cable and torque bolts to 15 Nm ( 11 ft.lb. ). Refer to Fuel Delivery and Air Induction / Service and Repair / Idle Learn Procedure. Service and Repair
8. Inspect for leaks.