Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Impala V6-3.4L VIN E >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Front Bumper Reinforcement >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Bumper Reinforcement: Service and Repair




Front Bumper Impact Bar Replacement (Impala)

Removal Procedure




1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Impala) (Front Bumper Fascia Replacement).
2. Remove the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement (Impala) (Service and Repair).
3. Remove the wiring harness from the rear of front bumper impact bar.




4. Remove the front bumper impact bar bolts.




5. Remove the front bumper impact bar.

Installation Procedure




1. Install the front bumper impact bar to the body.





Notice: Refer to Fastener Notice in Cautions and Notices.

Important: The upper right hand location is a net hole locator and must be installed first.


2. Install the front bumper impact bar bolts.

Tighten the front bumper impact bar bolts to 25 Nm (18 lb ft).




3. Install the wiring harness to the rear of the front bumper impact bar.
4. Install the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement (Impala) (Service and Repair).
5. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Impala) (Front Bumper Fascia Replacement).

pro multis · About Operation CHARM