Steering Column Trim Covers

Removal Procedure
1. Disable the SIR system. Refer to Disabling the SIR System in Air Bags and Seat Belts.
2. Remove the tilt lever. Refer to Tilt Lever Replacement - On Vehicle.





3. Remove the steering column lower trim cover mounting screws (1) from the steering column lower trim cover (2).
4. Remove the steering column lower trim cover from the steering column.





5. Remove the upper trim cover retaining screw (1) from the upper trim cover (2).
6. Remove the upper trim cover from the steering column.

Installation Procedure
1. Position the upper steering column trim cover on the steering column.

Notice: Refer to Fastener Notice in Service Precautions





2. Install the steering column upper trim cover mounting screws (1) to the upper trim cover (2).
Tighten the steering column upper trim cover mounting screws to 1.5 Nm (13 inch lbs.).





3. Position the lower trim cover to the upper trim cover.
4. Install the steering column lower trim cover mounting screws (1) to the steering column lower trim cover (2).
Tighten the steering column lower trim cover mounting screws to 3.5 Nm (31 inch lbs.).
5. Install the tilt lever. Refer to Tilt Lever Replacement - On Vehicle.
6. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts