Diagnostic System Check - Remote Keyless Entry
DIAGNOSTIC SYSTEM CHECK - REMOTE KEYLESS ENTRYTEST DESCRIPTION
Steps 1 - 2:
Steps 3 - 8:
The numbers below refer to the step numbers on the diagnostic table.
2. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit.The specified procedure will determine the particular condition.
5. The presence of DTCs which begin with �U� indicate some other module is not communicating. The specified procedure will compile all the availableinformation before tests are performed.