Diagnostic System Check - Vehicle

DIAGNOSTIC SYSTEM CHECK

TEST DESCRIPTION

Steps 1-6:

Steps 7-8:

The numbers below refer to the step numbers on the diagnostic table.
1. This step ensures that the battery, and the vehicle primary power and ground systems are functioning correctly.
3. Lack of communication may be due to a particular malfunction of a serial data circuit. The link to "Data Link References" will provide a list of modules and the associated data network no communication diagnostic link.
4. A Power Mode Master, which is operating in the incorrect power mode based on key position, may cause other symptoms and/or DTCs to set. The link to "Power Mode Mismatch" will correct the condition before checking for module DTCs or symptoms.