Front Seat Back Replacement

Front Seat Back Replacement

Removal Procedure





1. Remove the front bucket seat from vehicle. Refer to Front Seat Replacement - Bucket Front Seat Replacement - Bucket.

2. Remove the screws and slide the back panel down to remove it.





3. Remove the each seat trim.

4. Disconnect the electrical connectors.

5. Remove the bolts and the seat back.

Installation Procedure





1. Install the seat back onto the seat cushion.

Notice:
Refer to Fastener Notice Fastener Notice.

2. Install the front seat back bolts.

Tighten the front seat back bolts to 45 Nm (33 lb ft).

3. Connect the electrical connectors.





4. Install the seat trims to its original position.

5. Install the back panel onto the seat with the screws.

Tighten the front seat cover screws to 12 Nm (106 lb in).

6. Install the front bucket seat in the vehicle. Refer to Front Seat Replacement - Bucket Front Seat Replacement - Bucket.