Ignition Coil Replacement - Bank 1

Ignition Coil Replacement - Bank 1

Removal Procedure

1. Turn the ignition OFF.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front (Intake Manifold Cover Replacement - Front).

Note: Do NOT disconnect the fuel pipes and/or hoses.




4. Remove the ignition coil electrical connector(s).




5. Remove the ignition coil bolt(s).
6. Remove the ignition coil(s).

Installation Procedure




1. Install the ignition coil(s).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the ignition coil bolt(s) and tighten to 10 Nm (89 lb in).




3. Install the ignition coil electrical connector(s).
4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front (Intake Manifold Cover Replacement - Front).