Fuel Pump Module Replacement (NT7)

Fuel Pump Module Replacement (NT7)

Special Tools

CH-48482 - Fuel Tank Sender Wrench

For equivalent regional tools, refer to Special Tools (Tools and Equipment).

Removal Procedure

Warning: Refer to Gasoline/Gasoline Vapors Warning (Service Precautions).

1. Remove the fuel tank. Refer to Fuel Tank Replacement (Removal and Replacement).




2. Disconnect the electrical connector (1) and the plastic connector (2). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service).
3. Using the CH-48482 - wrench , remove the cam lock ring (1) by turning counterclockwise.




4. Remove the fuel pump (1) and the O-ring (2).

Installation Procedure

1. If replacing only the fuel pump module, transfer the fuel level sensor. Refer to Fuel Level Sensor Replacement (NU6) (Fuel Level Sensor Replacement (NU6))Fuel Level Sensor Replacement (NT7) (Fuel Level Sensor Replacement (NT7)).




2. Install the fuel pump (1) and use a NEW O-ring (2).
3. Connect the electrical connector.




4. Using the CH-48482 - wrench , install the cam lock ring (1) by turning clockwise.
5. Install the fuel tank. Refer to Fuel Tank Replacement (Removal and Replacement).




6. Connect the fuel pump electrical connector (1) and the plastic connector (2). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service).