Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2010 >> Cobalt L4-2.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Testing and Inspection




Electronic Brake Control Module Programming and Setup

EBCM Replacement

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

EBCM Reprogramming-Refer to Service Programming System (SPS) (Service Programming System (SPS)).

EBCM Reprogramming

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) (Service Programming System (SPS)).

Setup for Component Replacement

The replacement of some components will require a setup procedure for complete repair.

* Brake Pressure Modulator Valve Replacement
* Electronic Brake Control Module (EBCM) programming or replacement
* Steering angle sensor replacement
* Steering column replacement
* Steering column replacement
* Steering gear replacement
* Yaw rate and Lateral accelerometer sensor

1. Center the steering wheel with the wheels facing forward.
2. With a scan tool, perform the special functions steering position sensor calibration and follow the on screen instructions.

pro multis · About Operation CHARM