Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Caprice PPV V8-6.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 86. Engine Block Valley Cover Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

86. Engine Block Valley Cover Installation




Engine Block Valley Cover Installation





Note:
All gasket surfaces should be free of oil or other foreign material during assembly.

1. Lubricate the O-ring seals (537) with clean engine oil.

2. Install the O-ring seals (537) to the cover.





Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the cover (555), gasket (556), and bolts (506). Tighten the cover bolts to 25 Nm (18 lb ft).





4. Apply sealant to the threads of the sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers Adhesives, Fluids, Lubricants, and Sealers for recommended sealant.

5. Install the oil pressure sensor (706) and sealing washer (707). Tighten the sensor to 35 Nm (26 lb ft).

pro multis · About Operation CHARM