Child Seat Tether Attachment: Service and Repair

Child Restraint Tether Anchor Replacement (Sedan)

Removal Procedure

Warning

Do NOT attempt to repair or alter the tether anchor on the child seat restraint system. If the tether anchor is damaged, replace the entire tether anchor. Altering the tether anchor could result in personal injury.





1. Detach the child restraint tether anchor cover (2).

2. Remove the child restraint tether anchor to rear window shelf panel retaining bolt (1).

3. Remove the child restraint tether anchor (3) and spacing washers (4) from the rear window shelf panel.

Installation Procedure





1. Install the child restraint tether anchor (3) and spacing washers (4) to the rear window shelf panel.

Caution:
Refer to Component Fastener Tightening Caution Component Fastener Tightening Caution.

2. Install the child restraint tether anchor to rear window shelf panel retaining bolt (1) and tighten to 20 Nm (15 lb ft).

3. Attach the child restraint tether anchor cover (2).