Rear Roof Bow Trim Panel Replacement

Rear Roof Bow Trim Panel Replacement

Removal Procedure





1. Remove the roof lift off panel.

2. Remove the push-pins from the outer ends of the roof bow center trim panel.

3. Starting in the center of the roof bow center trim panel pull down on the trim panel separating the retaining clips and the hook and loop fastener patches from the roof bow.

4. Remove the roof bow interior trim panel.

Installation Procedure





1. Position the roof bow interior trim panel to the roof bow attaching the left center alignment clip first.

2. Align the rear antenna cable to the notch in the rear flange of the trim panel.

3. Push upward on the trim panel attaching the remaining clips and the hook and loop fastener patches.

4. Install the push-pins through the ends of the roof bow center trim panel.

5. Install the roof lift off panel.