50. Intake Manifold Assemble

Intake Manifold Assemble (1.4L LUH, LUJ and LUV)




1. Install the evaporative emission canister purge solenoid valve (3).
2. Install the 2 manifold absolute pressure sensors (2).
3. Install the 2 manifold absolute pressure sensor bolts (1) and tighten.




4. Install the fuel injection fuel rail assembly (3).

Caution: Refer to Fastener Caution Fastener Caution.

5. Install the 2 fuel injection rail bolts (2) and tighten to 8 Nm (71 lb in).
6. Install the fuel injection rail ground cable nut (1) and tighten.
7. Install a NEW intake manifold gasket (4).