Removal and Replacement

Throttle Body Assembly Replacement (1.4L LUH and LUJ)

Removal Procedure

1. Open the hood.




2. Disconnect the throttle body wiring harness plug (1).
3. Remove the charge air cooler outlet air hose from the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement (Manual Transmission) Charge Air Cooler Outlet Air Hose Replacement (Manual Transmission)Charge Air Cooler Outlet Air Hose Replacement (Automatic Transmission) Charge Air Cooler Outlet Air Hose Replacement (Automatic Transmission).




4. Remove the 4 throttle body bolts (3).
5. Remove the throttle body (2) along with the throttle body seal ring (1).

Installation Procedure




1. Install the throttle body (2) along with a NEW throttle body seal ring (1).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the 4 throttle body bolts (3) and tighten to 8 Nm (71 lb in).
3. Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement (Manual Transmission) Charge Air Cooler Outlet Air Hose Replacement (Manual Transmission)Charge Air Cooler Outlet Air Hose Replacement (Automatic Transmission) Charge Air Cooler Outlet Air Hose Replacement (Automatic Transmission).




4. Connect the throttle body wiring harness plug (1).
5. Close the hood.