Removal and Replacement

Throttle Body Assembly Replacement

Removal Procedure

1. Disconnect the throttle body wiring harness connector.

2. Remove the charge air cooler outlet air hose from the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement Service and Repair.





3. Remove the 4 throttle body fasteners (3).

4. Remove the throttle body (2) along with the throttle body seal ring (1).

Installation Procedure





1. Install the throttle fasteners (2) along with a NEW throttle body seal ring (1).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the 4 throttle body fastener (3) and tighten to 8 Nm (71 lb in).

3. Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement Service and Repair.

4. Connect the throttle body wiring harness connector.