Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2013 >> Camaro V6-3.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Mount: Service and Repair




Transmission Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

Note:
The engine mounts must NOT bend or deflect from the vertical position, damage to the mount will occur.

Note:
Do Not support the transmission using the oil pan surface.

2. Support the transmission with a suitable jack.

3. Remove the transmission mount nuts.

4. Remove the transmission support retaining bolts, then remove the transmission support from the vehicle.





5. Remove the transmission mount bolts.

6. Remove the transmission mount from the transmission.

Installation Procedure

Note:
The engine mounts must NOT bend or deflect from the vertical position, damage to the mount will occur.

1. Install the transmission mount to the transmission.





Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the transmission mount bolts and tighten to 58 Nm (43 lb ft).

3. Install the transmission support.

4. Install the transmission support bolts and tighten to 58 Nm (43 lb ft).

5. Install the transmission mount nuts and tighten to 58 Nm (43 lb ft).

6. Remove the support from under the transmission.

7. Lower the vehicle.

pro multis · About Operation CHARM