Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Outlet: Service and Repair




Water Outlet Replacement (LUV)

Removal Procedure

1. Drain the engine coolant system. Refer to Cooling System Draining and Filling Cooling System Draining and Filling.





2. Remove the following:

* Engine coolant air bleed hose (1)

* Engine coolant temperature sensor (2) and connector clip (3)

* Heated oxygen sensor connector (4)





3. Remove the heater outlet hose (1) and the heater inlet hose (2).





4. Remove the water outlet bolts (1) and discard the water outlet seal (2).

5. Remove the water outlet (3).

Installation Procedure

1. Clean the sealing surfaces.





2. Install the water outlet (3) and a NEW water outlet seal (2).

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the water outlet bolts (1) and tighten to 8 Nm (71 lb in).





4. Install the heater outlet hose (1) and the heater inlet hose (2).





5. Connect the following:

* Engine coolant temperature sensor (2) and connector clip (3)

* Heated oxygen sensor connector (4)

* Engine coolant air bleed hose connector (1)

6. Fill the engine coolant system. Refer to Cooling System Draining and Filling Cooling System Draining and Filling.

7. Start the engine and check for coolant leaks.